-
-
-
-
PRODUCTS
-
GYX-L08B Seated Leg Press Machine
GYX-L08B Seated Leg Press Machine
[Specification] : 2020×598×1590mm
[Safe Usage Scope]: 6100×3600 (mm)
[Instructions for Use]: Sit on the machine, press down on the pedal to fully extend your legs, then slowly return to the starting position.
[Main Features]: Enhance lower-limb strength and improve the stability of the knee and ankle joints.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct‑buried type; the main upright posts are made of national‑standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The two limit‑stop support beams are fabricated from national‑standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm, with a center‑to‑center spacing of 500 mm.
◆ The seat and pedal tubes are made of a diameter of 60m m, a national-standard steel pipe with a wall thickness of 3 mm Single-pass bending forming ；
◆ The footrest crossbeam is made of national-standard steel tubing with a diameter of 60 mm and a wall thickness of 3 mm, and its surface is embossed to provide slip resistance.
◆ The seat plate is stamped from 4 mm-thick cold-rolled steel, ensuring an 8-year service life; its perimeter features R2 rounded corners to prevent personal injury.
◆ The limit switch employs a fully cast-steel, three‑face impact‑type internal limiter, increasing the load‑bearing area. The impact pad is made of polyurethane, offering excellent resistance to… Impact-resistant, with excellent elasticity, aging resistance, and resistance to both high and low temperatures; equipped with four high-quality 6205 bearings and a central spindle diameter of 25 mm. The thickness of the limit side plate is 8 mm, limit sleeve diameter 13 3 mm, length 80 mm, thickness 8 Mm, ensuring compliance with usage requirements, All exposed edges are chamfered with an R2 radius to reduce impact-related injuries.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals that provide excellent sealing, effectively preventing water and dust ingress for long-lasting durability.
◆ Anti-slip devices are installed at the footrests to prevent slipping and potential injuries.
◆ The distance between the equipment’s swing arm and the upright post is greater than 230 mm, and the clearance between the bottom of the equipment’s moving parts and the floor is 410 mm.
◆ The top of the upright post is sealed to prevent rainwater from entering.
◆ The equipment nameplate is made of fully stainless steel with an etched finish, measuring 220×80 mm; it is secured with rivets for robustness, and its edges fit tightly against the upright post.
Avoid causing snagging injuries;
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with the standard requirements. Request.
◆ The entire machine has no snagging, no crushing points, no shearing points, and no pinching hazards; all apertures and gaps comply with… GB19272-2011 Standard;
◆ The equipment features a two‑station exercise configuration, allowing two users to operate it simultaneously.
◆ The equipment shall be buried to a depth of no less than 500 mm, with an underground installation dimension of no less than 500 × 500 × 600 mm.
◆ The materials are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. The pipe-bending process employs a CNC pipe bender, with angles… Accurate dimensions and aesthetically pleasing appearance; prior to welding, the components undergo degreasing to ensure that no oil or contaminants remain on the workpiece surface, followed by welding. Using a CO₂ shielded welding machine with a mixed gas, the welds exhibit an aesthetically pleasing appearance and straight bead profiles, eliminating the need for grinding. It is also equipped with a dust collection and treatment system to purify the workshop air, ensuring workers’ health. Surface treatment is carried out using blasting. Round‑edge finishing, thorough rust removal, increased workpiece surface area, and enhanced adhesion of the powder coating. Outer surface: Forbidden City green ring Anti-static powder coating, applied using imported electrostatic spraying equipment, delivers uniform powder distribution and strong adhesion; the coated surface is resistant to acids and alkalis. It is resistant to damp heat, aging, and corrosion, with an attractive appearance, making it suitable for humid and acid‑rain environments; the product’s coating formulation does not… It contains toxic elements; powder recovery employs a cyclone-type centrifugal separator, achieving a recovery rate of up to 98.6% and resulting in savings. The powder reduces dust pollution, is easy to handle, and is energy-efficient and environmentally friendly.
◆ The equipment is packaged in a double-layer system: thickened bubble wrap inside and strapping tape outside, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
