-
-
-
-
PRODUCTS
-
GYX-L07 Instruction Label
GYX-L07 Instruction Label
[Specification]: 1044×114×1321 (mm)
[Instructions for Use]: This equipment is intended solely for pre-use warning instructions.
Category:
Product Description
[Main Technical Parameters]:
◆ Directly buried type; the main upright posts are made of national-standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The crossbeam is made of angle steel with dimensions 30×30 mm and a wall thickness of 3 mm.
◆ The frame steel tubes are square sections with dimensions of 25×25 mm and a wall thickness of 2 mm.
◆ The information sign is fabricated from 304 stainless steel, with dimensions of 600 × 800 mm and a wall thickness of 1.2 mm. It is assembled by clamping the main frame to the mounting bracket and secured with stainless steel anti-theft bolts.
◆ The equipment nameplate is made of fully stainless steel with a corrosion‑resistant finish, measures 220 × 80 mm, features robust rivets, and has edges that fit tightly against the upright post.
Avoid causing snagging injuries;
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with the standard requirements. Request.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with the GB 19272-2011 standard.
◆ The equipment shall be buried to a depth of no less than 500 mm, with an underground installation dimension of no less than 500 × 500 × 600 mm.
◆ The components are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. Prior to welding, the components undergo degreasing treatment. Ensure that no oil or contaminants remain on the workpiece surface; welding shall be performed using a CO₂ shielded arc welder in conjunction with a mixed-gas shielding process. It features an aesthetically pleasing appearance, with smooth, straight weld beads that require no post-weld grinding, and is equipped with a dust collection and treatment system to purify workshop air, ensuring… The worker is in good health, and the surface treatment employs shot blasting, ensuring thorough rust removal, increasing the workpiece’s surface area, and enhancing… Adhesion of plastic powder, The exterior surface is coated with a green, environmentally friendly electrostatic powder finish, applied using imported electrostatic spraying equipment, ensuring uniform powder distribution. Uniform, with strong powder adhesion; the plastic surface is resistant to acids and alkalis, withstands high humidity and heat, resists aging and corrosion, and boasts an attractive appearance—ideal for humid environments. In wet and acid‑rain environments, the product’s coating formulation contains no toxic elements, and powder recovery is achieved using a cyclone‑type centrifugal separator. Recycling system with a recovery rate of up to 98.6%, reducing powder waste and minimizing dust pollution; easy to operate, energy-efficient, and environmentally friendly.
◆ The equipment is packaged in a double-layer system: the interior is wrapped with thickened bubble wrap, and the exterior is secured with strapping tape, effectively protecting it during transit. Avoid collisions during handling to ensure the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
