-
-
-
-
PRODUCTS
-
GYX-L04 Shoulder Joint Rehabilitation Device
GYX-L04 Shoulder Joint Rehabilitation Device
[Specification]: 1343×1170×1425 (mm)
[Safe Usage Scope]: 4400×4200 (mm)
[Instructions for Use]: Grasp the handle firmly with both hands, and slowly rotate the ring in the same or opposite direction, repeating the motion.
[Main Features]: Strengthen the shoulder girdle muscles and improve the flexibility and mobility of the shoulder, elbow, and wrist joints.
Category:
Product Description
[Main Technical Parameters]:
◆ Direct‑buried type; the main upright posts are made of national‑standard steel pipes with a diameter of 114 mm and a wall thickness of 3 mm.
◆ The cantilever tubing is made of national-standard steel pipe with a diameter of 60 mm and a wall thickness of 3 mm.
◆ The turntable is fully enclosed, with no snagging; its outer diameter is 450 mm, wall thickness is 2 mm, and it is formed in a single stamping operation. The spacing between the two turntables is 270 mm.
◆ Internally, a wear‑resistant nylon damper is installed between the two bearings to regulate the turntable’s rotational speed, ensuring user safety. The bearings are high‑quality 6205 units, and the central shaft has a diameter of 25 mm, meeting all performance requirements.
◆ The machine’s bearings are equipped with specially designed skeletal oil seals, offering excellent sealing performance, effective water and dust resistance, and long-lasting durability.
◆ The handle is made of nylon alloy, offering a comfortable grip, excellent resistance to aging and extreme temperatures, and incorporates anti-theft features for long-lasting durability.
◆ The equipment nameplate is made of fully stainless steel with a corrosion‑resistant finish, measures 220 × 80 mm, features robust rivets, and has edges that fit tightly against the upright posts to prevent snagging or injury.
◆ The equipment has undergone relevant static load, stability, and fatigue tests in accordance with the GB 19272-2011 standard and complies with its requirements.
◆ The entire machine has no snagging, crushing points, shearing points, or pinching hazards; all apertures and gaps comply with the GB 19272-2011 standard.
◆ The equipment features a two‑station exercise configuration, allowing two users to operate simultaneously.
◆ The equipment shall be buried to a depth of no less than 500 mm, with an underground installation dimension of no less than 500 × 500 × 600 mm.
◆ The components are cut using a fully automatic CNC sawing machine, ensuring high efficiency and precise positioning. For the bending process, a CNC pipe bender is employed, delivering accurate angles and an aesthetically pleasing finish. Prior to welding, all parts undergo degreasing to ensure that no oil or contaminants remain on the surface. Welding is performed with a CO₂‑shielded arc welder combined with a mixed‑gas shielding process, resulting in clean, smooth welds that require no post‑weld grinding. A dust collection and treatment system is installed to purify workshop air and safeguard worker health. Surface treatment utilizes shot blasting, providing thorough rust removal, increasing the effective surface area of the workpiece, and enhancing the adhesion of the powder coating. The exterior is finished with a green‑environmental, electrostatically applied powder coating—produced using imported electrostatic spraying equipment—offering uniform powder distribution, strong adhesion, and superior resistance to acids, alkalis, humidity, heat, aging, and corrosion. This coating is well suited for humid conditions and environments exposed to acid rain. The product’s paint formulation contains no toxic elements. Powder recovery is achieved through a cyclone‑type centrifugal recovery system, with a recovery rate of up to 98.6%, reducing material waste and minimizing dust pollution while maintaining ease of operation and promoting energy efficiency and environmental protection.
◆ The equipment is packaged in a double-layer system: thickened bubble wrap inside and strapping tape on the outside, effectively protecting it from impacts during transit and ensuring it arrives in perfect condition.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
