-
-
-
-
PRODUCTS
-
Hand-cranked vibration trainer
Hand-cranked vibration trainer
[Model]: GYX-LD03
[Specification]: 866 x 736 x 1540 (mm)
[Instructions for Use]: The user places both feet on the pedals, grasps the upper side handles with both hands, assumes a slight squatting stance, and centers the body’s weight between the legs. The torso remains upright, and both hands simultaneously rotate the flywheel in the same direction; the rotation speed should not be too fast, thereby generating vertical vibrations of the foot pedals.
[Main Features]:
1) Enhance the user’s upper limb muscle strength.
2) Helps users relax the muscles of the legs, hips, and lower back, boosts blood circulation, burns excess fat, clears the meridians, and promotes weight loss and body shaping.
3) Enhances hand–foot coordination, helping to alleviate leg and foot stiffness and the imbalance that can occur when walking after prolonged periods of inactivity.
Category:
Product Description
[Main Technical Parameters]:
1) This equipment uses a hand‑cranked rotary dial; through internal gearing and the action of an eccentric cam, it drives the vibration table to move vertically on both the left and right sides, thereby generating vibration.
2) The turntable is fabricated from 8-mm-thick steel plates, with both sides machined to flatness to ensure end-face flatness; the outer edge is fitted with an ABS-molded housing.
3) The turntable handle has a shaft diameter of 19 mm, a bearing seat diameter of 15 mm, and a handle sleeve diameter of 32 mm; it is made from seamless steel tubing with a wall thickness of 4 mm.
4) The column’s internal support framework is fabricated by welding 30 mm × 30 mm, 3 mm‑thick national‑standard steel tubing; the interior of the framework is reinforced with 6 mm‑thick high‑quality steel plates to ensure structural strength, and the bottom flange is made from 12 mm‑thick high‑quality steel plate.
5) The anti-slip footplate is formed by die-casting, made of nylon, and features a 5-mm-thick high-quality steel liner that has been bent.
6) The base is fabricated by laser cutting from 4-mm-thick steel plate, with a welded frame at its bottom made of 40 mm × 40 mm national‑standard steel tubing, 2.2 mm wall thickness. The vibration table housing fixed to the top of the base is formed by bending and welding high‑quality 6‑mm‑thick steel plate.
7) The main internal drive shafts all feature diameters of Φ35 mm and Φ28 mm, manufactured through quenching and tempering. Key internal transmission components do not undergo spray coating, which minimizes dimensional deviations and provides rust‑preventive protection, thereby ensuring robust transmission strength.
8) The housing is manufactured via ABS injection molding, ensuring both the overall appearance and quality.
9) The underground installation method is pre-embedded, with foundation dimensions of 400 mm × 400 mm × 500 mm (length × width × height).
10) All板材 in the equipment are laser‑cut to size, and degreasing is performed prior to welding to ensure that no oil or contaminants remain on the workpiece surface. Welding is carried out using a CO₂‑shielded arc welder with a mixed gas shielding atmosphere, resulting in aesthetically pleasing welds with smooth, straight bead profiles. A dust collection and treatment system is also installed to purify workshop air and safeguard worker health. Surface treatment employs shot blasting, achieving thorough rust removal, increasing the effective surface area of the workpiece, and enhancing the adhesion of the powder coating. The exterior finish utilizes a green, environmentally friendly electrostatic powder coating formulated to meet the standards of the Forbidden City; it is applied using imported electrostatic spray equipment, ensuring uniform powder distribution and strong adhesion. The coated surface exhibits excellent resistance to acids and alkalis, high humidity and heat, aging, and corrosion, while maintaining an attractive appearance—making it well suited for humid conditions and environments exposed to acid rain. The product’s coating formulation contains no toxic elements. Powder recovery is accomplished via a cyclone‑type centrifugal recovery system, achieving a recovery rate of up to 98.6%, thereby conserving powder, reducing dust pollution, and offering convenient operation that is both energy‑efficient and environmentally friendly.
11) The equipment is packaged in a double-layer system: thickened bubble wrap inside and strapping tape outside, effectively preventing impacts during transit and ensuring the equipment remains undamaged.
Keywords:
Related products
Online Exhibition Hall
Follow us
Scan to access the WeChat official account.
Contact us
Add：Sanhe Economic and Technological Development Zone, 50 km east of Jianguomen, Beijing
Tel：+86-316-3722333 +86-316-3722971
Fax：+86-316-37233038
E-mail：shguiyuxingty@sina.com
